Preparation and Standardization of 0.05 M Iodine

Preparation and Standardization of 0.05M Iodine using Arsenic Trioxide Preparation: Dissolve about 14 gm of iodine in a solution of 36 gm of potassium iodide in 100 ml of water,

Vikrant Bhusal Vikrant Bhusal

Preparation and Standardization of 0.05 M Potassium Iodate

Preparation and Standardization of 0.05 M Potassium Iodate Preparation: Weigh accurately 10.7 g ofpotassium iodate, previously dried at 110° to constant weight, in sufficient water to produce 1000 ml. Standardise

Vikrant Bhusal Vikrant Bhusal

Preparation and Standardization of 0.02 M Potassium Permanganate

Preparation and Standardization of 0.02 M Potassium Permanganate Preparation: Weigh 3.2 gm of potassiumpermanganate in 1000 ml of water, heat on a water-bath for 1 hour, allow to stand for

Vikrant Bhusal Vikrant Bhusal

Preparation and Standardization of 0.1 M Potassium Hydroxide

Preparation and Standardization of 0.1 M Potassium Hydroxide with HCl Prearation: Weigh 6gm of Potassium Hydroxide and transfer to 1000ml volumetric flask dissolve and dilute upto mark with purified water.

Vikrant Bhusal Vikrant Bhusal

Preparation and Standardization of 0.1M Sodium Nitrite

Preparation and Standardization of 0.1M Sodium Nitrite Preparation: Weigh accurately 7.5 gm of Sodium Nitrite transfer it to 1000ml Volumetric Flask dissolve and dilute upto the mark with purified water

Vikrant Bhusal Vikrant Bhusal

Preparation and Standardization of 0.5 M Sulphuric Acid

Preparation and Standardization of 0.5 M Sulphuric Acid with Sodium Carbonate Preparation: Take 1000ml Volumetric flask and about 250 to 300 ml purified water in it. Measure about 28 ml

Vikrant Bhusal Vikrant Bhusal

Preparation and Standardization of 0.1 M Perchloric Acid

Preparation and Standardization of 0.1 M Perchloric Acid with KHP Preparation: Mix 8.5 ml of perchloric acid with500 ml of anhydrous glacial acetic acid and 25 ml of acetic anhydride,

Vikrant Bhusal Vikrant Bhusal

Preparation and Standardization of 1 M Hydrochloric Acid (HCl)

Preparation and Standardization of 1 M Hydrochloric Acid (HCl) with Sodium Carbonate Preparation: Take 1000 ml volumetric flask, add about 200 to 300 ml purified water in it. Measure about

Vikrant Bhusal Vikrant Bhusal

Preparation and Standardization of Sodium Thiosulphate 0.1 M

Preparation and Standardization of Sodium Thiosulphate 0.1 M with potassium bromate Preparation: Dissolve 25 g of sodiumthiosulphate and 0.2 g of sodium carbonate in carbon dioxide-free water and dilute to

Vikrant Bhusal Vikrant Bhusal

Preparation and Standardization of 0.1 M Silver Nitrate

Preparation and Standardization of 0.1 M Silver Nitrate With Sodium Chloride Preparation: Dissolve 17.0 g in sufficient water to produce 1000 ml. Standardise the solution in the followingmanner. Standardization: Weigh

Vikrant Bhusal Vikrant Bhusal